Comark RF500 Uživatelský manuál Strana 17

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 42
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 16
Gateway Commissioning
This section covers network connection, network configuration, setting date and time,
adding users and adding transmitters.
The Gateway is commissioned using a Web Browser via a Network connection. This
connection can be via cross-over RJ45 cable (recommended) or via modem (if fitted).
Requirements for Commissioning
PC with RJ45 Ethernet jack or Modem
Ethernet cross-over cable
Static IP address and subnet mask (Usually allocated by IT Department)
Default Gateway IP address (To enable access from different subnets)
Email server name or IP address
DNS server IP address (required if Email server is named)
For modem connections telephone sockets for the Gateway and PC modem plus
associated leads are required. An IP address is not required for modem only
operation.
Gateway to PC Network Connection via RJ45 cross-over Ethernet Cable
You should undo these steps once you have completed commissioning the
Gateway.
Connect the cross-over Ethernet cable between PC and RJ45 jack on the
Gateway.
Set up your PC temporarily with a fixed IP address using the following instructions
for Windows 98, ME, 2000 and XP.
17
Zobrazit stránku 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 41 42

Komentáře k této Příručce

Žádné komentáře