Comark N9002 Uživatelský manuál

N9002 THERMOMETEROPERATING INSTRUCTIONS

96.3 Differential Mode (DIFF)There are two DIFF modes available for the N9002, single channel and twin channel. If only one channel (T1 or T2) is enab

109.0 CHANGING THE BATTERIESThe symbol BAT ashes on the display as soon as the battery voltage drops to an initial warning level. During this rst l

1110. N9002 THERMOMETER SPECIFICATIONSMeasurement Thermocouple types K, N, T, J, R, S, E, BConnector 2-pin sub-min connectorMeasurement Range (°C)

12

Comark Instruments52 Hurricane Way,Norwich, Norfolk, NR6 6JB United KingdomTel: +44 844 815 6599Fax: +44 844 815 6598Email: sales@comarkinstrument

1CONTENTSPAGE GENERAL INFORMATION ... 2 CALIBRATION, CERTIFICATION AND SERVICE ...

2GENERAL INFORMATIONIt is recommended that you read the safety and operation instructions before using this instrument.WARNINGTO AVOID ELECTRIC SHOCK

3CALIBRATION, CERTIFICATION AND SERVICECerticationComark can provide certicates of calibration for its whole product range, to suit ISO 9000 and oth

41. N9002 DESCRIPTIONThe N9002 is a high performance handheld industrial thermometer housed in the proven 'N' series case for ultimate stre

53. OVERVIEW OF DISPLAY SYMBOLS A – Activated during DIFFerential mode with both T1 and T2 enabled.B – Main Temperature display. T1 is displayed her

64. THERMOMETER SETUPPressing SETUP will enter the setup menu for the thermometer. The following stages are included in the SETUP menu and are acces

74.5 Date and Time SetupUse the UP/DOWN arrow keys to select the minutes.Press ENTER/HOLDUse the UP/DOWN arrow keys to select the required hours in 24

8If the correct setting is not known, contact Comark or your Distributor for details.Press ENTER/HOLD to nish and exit from SETUP.5.0 SWITCHING ON